Configure your Netgear range extender using IP address

Looking for extender setup page? If you are moving your head in yes, this is the post you actually need. Here, we will make you aware of the process to set up your Netgear range extender using the default IP address. Just stick to this post and get relevant solutions to your problems related to Netgear extender setup using the IP address.

Netgear192.168.1.250 is the default IP i.e. Internet Protocol address intended to handle the basic and advanced settings for your Netgear wireless extender. This IP address is being used when doesn’t work for you. Netgear extenders are the leading WiFi boosters to deal with dead zones which you are getting within your house or workplace.

In case you are unable to access for setting up your extender, use this IP address for the same. Here, we are going to explain the steps in details to configure your Netgear range extender using

Set up Netgear Extender with an Ethernet port

Does your WiFi extender include an Ethernet port on it? If a big yes, walk through the instructions given below:

  • Plug in the Netgear WiFi extender to a power source.
  • Ensure that its LED lights become visible.
  • Switch on your computer properly.
  • Connect it to a network connection.
  • Take an Ethernet cable and connect the extender.
  • In case your WiFi network is password protected, you have to enter the login user ID and password.
  • Launch a web browser of your choice.
  • Enter in the address bar.
  • Once done, hit enter key.
  • A new dashboard will open known as Netgear genie setup.
  • It will provide you on-screen instructions to install and configure the range extender. Simply follow them one by one.
  • Enter security settings.

Now, you are ready to use your Netgear range extender. Change the settings of extender according to your preferences. If you fail in setting up the extender or stuck at any step, don’t shy to take instant help from our knowledgeable technicians. Just call us at our toll-free number 1-888-674-6890 and find your extender installed and configured within minutes.

Set up Netgear extender without an Ethernet port

If you own a Netgear extender which doesn’t have an Ethernet port, here are the steps to consider while installing it:

  • Restore the default settings on your range extender.
  • Connect it to an available WiFi network.
  • Open an internet browser and go to 168.1.250 setup page.
  • Write the username and password in the given empty boxes.
  • Walk through Netgear genie setup wizard steps.
  • Connect your WiFi-compatible devices to the extender once again.

So, your Netgear WiFi extender has set up. If these steps don’t work for you, Netgear extender setup help is just a phone call away – 1-888-674-6890. is not working?

Sometimes, the IP address doesn’t work and load the new extender setup page. It often happens because it is not a regular website on the internet. You hardly know that it is a local web address. That’s why you may face errors. Fix this issue by having a look at the below-mentioned steps:

  • Check the Netgear WiFi range extender manual and find the default IP.
  • Reboot the extender once and try again.
  • Verify whether there are loose connections or not.
  • Exit the browser window and open a new window.
  • Delete the cache, cookies and history of your internet browser.
  • Check if your browser is running the latest version. If not, upgrade it immediately.
  • Try using another web browser to make sure that the issue is not related to the browser you were using earlier.
  • Use net local web address if you are setting up the Netgear extender on your iOS device like Mac, iPhone or iPad.
  • Put the WiFi range extender a few feet away from microwave ovens, refrigerators, cordless phones, Bluetooth speakers, baby monitors, mixers, radios, etc.
  • Make use of an Ethernet cable to connect the extender.

If the issue still exists, contact our Netgear extender support team. We are 24×7 on our duty to keep you away from technical problems.

Rate this post